If you want to take this design into the physical world, the major components
you need to build are:
- Manufacture the PCB, e.g. with a company like OSH Park
- Manufacture the enclosure, e.g. with your own 3D
printer (you may find one at your
local TechShop), a rapid prototyping shop like
Fathom or an injection molding service like
Protomold.
- Assemble the components onto the PCB - there are surface mount components that
will reuquire a reflow oven, so you can’t hand solder this. Again, check out
your local TechShop (Note: currently all TechShops are close but look for similar shops such as ProtoHaven) or a prototyping firm like SF
Circuits.
VI Reference Design